8 Pcs 5 Inch Car Polishing Sponge Set For Car Beauty Waxing And
Polishing
Product content:
1*5" green wave sponge
1*5" black wave sponge
1*5" blue wave sponge
1*5" white wave sponge
1*5" yellow wave sponge
1*5" orange wave sponge
1*5" grinding disc plus rod
1*5" wool ball
Product features:
This is a set of 5-inch polishing buffer wool pads and a threaded
drill bit adapter with a shank.
Size: 5 inches
Material: high-quality wool and sponge
Adhesive backing design, you can easily replace the wool cushion
within a few seconds.
Easy to use, can be used for pneumatic or electric polishing
machine, for polishing car details. Suitable for any items that
need to be polished or sanded, such as vans, ceramics, glass, stones, cars, and so on.
Polishing step:
Car surface after spraying, there may be coarse grain, sandpaper
marks, flow marks, anti-white, orange peel, and other paint film
surface fine defects, in order to make up for these defects,
usually after spraying grinding car polishing processing, in order
to improve the mirror effect of the paint film, to achieve bright,
smooth, gorgeous requirements. The steps of grinding and polishing
are as follows:
1. Clean the vehicle. Clean the whole vehicle with a strong paint
cleaning agent. When using a cleaning agent, it should avoid new
scratches caused by particle dust in grinding.
2, water sandpaper grinding. For the coating surface with coarse
grain, fine sandpaper marks, flow marks and other defects, before
polishing, first use 600#~1000# water sandpaper to cover the small
rubber lining block with water, and gently grind it until smooth
(pay attention to not wear through the paint layer).
3. Coarse and fine grinding. The use of machine grinding machine
(electric or pneumatic) plus coarse grinding paste, the traces of
water sandpaper rough grinding; Then add polishing paste polishing
for polishing fine grinding.
4. Polishing. Adopts the mechanical polishing machine, plus the
mirror surface treatment agent to throw off the spin printing left
by the coarse grinding paste, achieves the mirror surface polishing
effect.
5, manual glazing. After grinding and polishing, wipe the polishing
paste, immediately use cotton gauze coated with polished oil wax to
wipe all the polishing parts again, and then use dry cotton gauze
to wipe excess glazing wax, so that the paint surface is bright
like a mirror, gorgeous and dazzling.
| Product Name | 8 Pcs 5 Inch Car Polishing Sponge Set For Car Beauty Waxing And
Polishing |
| Color Availability | Green, Orange, Yellow, White, Blue, Black, or customized |
| Size | 5 Inch |
| Material | Sponge, Polypropylene, Wool |
| Usage | can be used for most kind of waxing, cleaning, and polishing |
| Weight | 200 g |
| Manufacturer | Anhui Zhenda Brush Industry Co.,Ltd. |
